Form Integrated Amplifier
Output power 200W+200W (4ohms)
160W+160W (6ohms)
100W+100W (8ohms)
THD (20Hz - 20kHz, both channel simultaneous drive, 8ohms) 0.008%
Cross modulation distortion (SMPTE) 0.008%
Output bandwidth (an 8-ohm load intensity, 0.04%) 10Hz - 50kHz
Frequency characteristic (compact disk, Source Direct) 5Hz-100kHz+0 -1 dB
Dumping factor (8 ohms, 20Hz - 20kHz) 180
Input sensitivity/impedance Phono MC: 270 microvolts/100 ohms
Phono man month: 2.4mV/47kohm
High SFT Level: 250mV/20kohm
Main in: 2.0V/22kohm
An Output voltage/impedance Pre out: 2.0V/250 ohm
Phono maximum permissible input (1kHz) MC:10mV
MM:100mV
RIAA deflection (20Hz - 20kHz) ±0.2dB
S/N (an IHF A network, input short-circuit) Phono MC:76dB
Phono MM:90dB
High Level:115dB
Tone control Bass: ±8dB (100Hz)
Treble: ±8dB (10kHz)
Input terminal Line: Four lines
Balance: One line
Tapes system: Two lines
Phone: One line
Main in: One line
Output-terminal Pre out: One line
Tapes system: Two lines
Speaker: Two lines
Headphone: One line
Supply voltage AC100V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Safety Law) 300W
The maximum Dimensions Width 458x height 166x depth of 464mm
Weight 23.0kg
Adjunct Wireless remote control
AC cable