OUTPUTS, ANALOG: (Stereo)

Balanced XLR 5.4V RMS (+14.6dBv) max.
Single-Ended RCA 2.7V RMS (+8.6dBv) max.

OUTPUT IMPEDANCE: (Analog) 400 ohms BAL, 200 ohms SE.

FREQUENCY RESPONSE: 0.5-20,000Hz ± +0 -.1dB.

SIGNAL TO NOISE RATIO: 96dBA

DISTORTION: -.025% 1kHz

RESOLUTION: 24 BIT DELTA-SIGMA DAC.

CHANNEL SEPARATION: 92dB 1kHz.

OUTPUTS, DIGITAL: (to external Digital-to-Analog Converter)

XLR Balanced AES/EBU 110-ohm 4V P-P.
BNC coax SPDIF 75-ohm 0.7V P-P.

SIGNAL FORMAT (disc):
Sampling frequency: 44.1kHz.
Quantization Bit: 16bit linear per channel.
Channel bit rate: 4.3218Mb/sec.
Channel modulation code: EFM (8 -14 modulation).
Error correction: CIRC (cross interleave Reed Solomon Code).

DRIVE MECHANISM:
Wow & Flutter: Unmeasureable (Quartz stability).
Discs: Accepts 5" (12cm) and 3" (8cm) sizes.

OPTICAL PICKUP:
Type: 3-beam LDGU (Laser Diode & Grating Unit), with holographic diffraction light pen.
Laser: GaAIAs semiconductor, 780nm, 0.5mW maximum output.
Servo: Digitally-controlled low-inertia linear positioning actuator.

JITTER REDUCTION: High-stabillity crystal-controlled re-clocking for all outputs.

DISPLAY: Six-digit vacuum fluorescent, with optical filter.

POWER REQUIREMENTS: (detachable power cord): 100-135VAC 60Hz (200-270VAC 50/60Hz), 40 watts maximum. (26 watts standby)

COMPLIANCE: RF Interference complies with FCC and CE MARK.

FRONT PANEL CONTROL FUNCTIONS:
STANDBY - operate/standby mode
PAUSE program
STOP disc
PLAY disc
PREV selection
NEXT selection

INFRARED REMOTE CONTROL FUNCTIONS:
(Standard RC5 code, 30ft max distance)
0-9 digit entry keys
SCAN 10 seconds each track
PAUSE program
REP track/disc
STOP program
PLAY disc
SHUF random sequence play
STBY operate/standby mode
PROG enters selction
TIME elapsed, remaining track; remaining disk
A/B repeats segment
Previous track
Next track

DIMENSIONS: 19" (48 cm) W x 5.25" (13.4 cm) H x 12.25" (31.1 cm) D. Handles extend 1.50" (3.8 cm) forward of the front panel. Rear connectors extend .75" (1.9 cm).

WEIGHT: 25 lbs. (11.4 kg) Net; 35 lbs. (15.9 kg) Shipping.