FREQUENCY RESPONSE:.5dB, 1.0Hz to 200kHz at rated output. -3dB points below 0.3Hz and above 400kHz.

DISTORTION: Less than .015% at 4V RMS Balanced output.

GAIN: Main output: 12.3dB Balanced, 6.3dB Single Ended. Tape output: 0dB.

INPUT IMPEDANCE: 220K ohms Balanced, 110K ohms SE, Inputs (8): tape, tuner, phono, CD, video, aux 1, aux 2, aux 3, (XLR and RCA connectors).

OUTPUT IMPEDANCE: 400 ohms Balanced, 200 ohms SE main (2), 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 main, 1 tape (XLR and RCA connectors).


MAXIMUM INPUT: 7.0V RMS maximum Balanced, (3.5V RMS SE).

RATED OUTPUTS: 4V RMS (2V RMS SE) into 100K ohm balanced load (maximum balanced output capability is 30V RMS at less than 0.5% THD at 1kHz).

CONTROLS: Gain, Balance, Select Record, Select Input. Toggle switches: Power/Off, SE/Balanced Input, Invert/Normal, Mute/Operate.

POWER SUPPLIES: Electronically regulated low and high voltage supplies. Automatic 45 sec. warm-up/brown-out mute. Line regulation better than .01%. NOISE: 13uV RMS residual IHF weighted balanced noise output with gain control minimum (110dB below 4V RMS output, 93dB below 2V RMS SE output).


TUBE COMPLEMENT: 8-6922/E88CC dual triode. (Vacuum tube audio circuit, solid-state power supply.)

POWER REQUIREMENTS: 100-135VAC 60Hz (200-270VAC 50/60Hz) 90 watts maximum.

DIMENSIONS: 19" (48 cm) W x 7" (17.8 cm) H (standard rack panel) x 15.5" (39.4 cm) D. Handles extend 11/2" (3.8 cm) forward of the front panel.

WEIGHT: 30 lbs. (13.6 kg) Net; 43 lbs. (19.5 kg) Shipping.

Specifications subject to change without notice.