date of introduction March 2008
type network music player
dimensions (h) 44.5 mm x (W) 345 mm x (d) 274 mm
(h) 1.8 inches x (W) 13.6 inches x (d) 10.8 inches
(can be positioned horizontally or vertically)
Weight 2.7 kg / 6 lb
Mains supply voltage 100 – 120 V ac (±10%) 50 – 60hz (auto ranging)
200 – 240 V ac (±10%) 50 – 60hz
fuse 250 V,t1.6a (not user replaceable)
power consumption standby 10 W operational 14 W maximum continuous 120 W
supported file types flac,alac, WaV, Mp3, WMa(except lossless),aiff,aac, OGG
audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24k, 29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
Word depths 16 – 24 bits
ethernet interface 100Base-t rJ45
control protocol compatible with upnp™ media servers, upnp™ AV 1.0 control points
local control rs232 x 2 RJ11 remote controllable (handset not supplied)
connector types
optical digital output toslinK
coaxial digital output rca phono
line outputs rca phono
speaker outputs inverted safety 4 mm BFA sockets
Output impedance line outputs 300Ω speaker outputs 0.06Ω
Output voltage line outputs 2.8 V peak, 2 V rms (0 dBfs)
speaker outputs 15 V peak, 10 V rms (0 dBfs, 16.6 dB gain, vol. 79)
Output offset line outputs < 2 mV speaker outputs < 3 mV
signal to noise ratio
line outputs Better than -120 dB
channel balance Better than +/- 0.2 dB
channel separation
line outputs Better than -120 dB
speaker outputs Better than -100 dB
Gain range -80 dB to +20 dB
Gain resolution 1 dB
unity gain volume 0 dB = volume 80
dynamic range 120 dB
damping factor 67
signal level for clipping 415 mV rms (0 dBfs, +16.6 dB gain, vol. 79)
harmonic distortion < 0.03% at 1 khz at 10 W
load tolerance unconditionally stable into all loudspeaker loads
frequency response pre-amp 2.5hz – 170 khz (-3 dB) power amp2.5hz – 48 khz (-3 dB)
speaker output voltage 15 V peak
speaker output power 20 W into 4W